The wood-fired oven
Ignis Pvgnax at La Corte Segreta: insulation beneath the hearth and around the dome, balanced baking during service, and house-made bread using the previous day’s heat.

Ancient oven in the bakery of N. Popidius Priscus, Pompeii: an early example of a masonry baking chamber.
Gary Todd · Photograph of an ancient oven at Pompeii. · Document source · Public domain
At La Corte Segreta, the wood-fired oven represents our purest vision of pizza: fire, dough and human craft. We have chosen to preserve this way of working in the spirit of the master pizzaioli tradition.
Baking that demands experience
Managing a fire and baking several pizzas requires constant attention. The pizzaiolo must watch the flame, follow the baking and act at the right moment. They learn to recognise when to move a pizza, turn it or take it out of the oven.
This mastery develops through practice. For us, it is one of the most demanding forms of the craft: every bake calls on observation, precise movements and the experience of the person holding the peel.
How we use it at La Corte Segreta
Our oven, Ignis Pvgnax, operates exclusively on wood fire, without gas, electricity or automated assistance. Every pizza is turned manually: no rotating platform replaces the pizzaiolo’s hand.
Why we chose beech
Before choosing beech for Ignis Pvgnax, we also worked with oak. In our trials, beech gave us the lively flame, quick response and bed of embers we wanted to keep pace with service. When we add a fresh log, that responsiveness helps us adjust the intensity of the fire.
We also found oak to be an excellent fuel, although less suited to the immediate response we were looking for. Under the conditions of our trials, its burn was better suited to a steady heat, such as that needed for certain oven dishes, including lasagne. This comparison reflects our experience with our own oven.
Care begins before the fire is lit
Our wood arrives dry and is then stored indoors. Two storage compartments were incorporated into the lower part of Ignis Pvgnax when it was built. We keep the wood there for long periods, rather than outside or in a cold garage, to preserve the responsiveness we need during service.
Every log must be kept clean and must never be stored directly on the floor. This care goes hand in hand with choosing very dry wood: some of the energy in damp wood is used to evaporate its water, rather than being available to heat the oven.
Our connection with Neapolitan tradition
We also drew on the traditional wood-fired cooking described by the Associazione Verace Pizza Napoletana. Its rules name beech and oak among the woods used. Our choice of beech follows that reference and the results of our own trials.
Sources and further reading
AVPN: the section on wood in the 2024 rules
Forest Research: the effect of moisture on wood fuel
Insulation at the heart of Ignis Pvgnax’s design
When designing Ignis Pvgnax, Crimi Salvatore paid particular attention to the insulation beneath the hearth and around the dome. He describes a depth of about 55 cm beneath the hearth, using several insulating materials, ash from Mount Etna and, in the lower section, custom-made vacuum insulation panels measuring 3 cm thick.
The oven’s layers serve different purposes. The refractory components store heat and release it during baking; the insulation limits heat loss into the supporting structure and to the outside. The vacuum panels slow heat transfer downwards, helping to retain energy in the hot part of the oven.
Why the hearth cools during a busy service
The hearth is the refractory surface on which the pizza rests. It transfers heat through direct contact, while the flame, dome and hot gases also heat the top through radiation and convection. Baking results from all these exchanges working together.
When pizzas follow one another quickly, they draw heat from the hearth and shield part of its surface from the dome’s radiation. In several ovens he used in the past, Salvatore experienced a drop in temperature even when alternating the positions where he placed the pizzas. Increasing the flame reheats the surface, but the fire needs adjusting again when the pace slows: a hearth that is no longer covered can then become hotter and scorch the bases of the next pizzas.
A store of heat to support the service
With Ignis Pvgnax, we aim to heat the oven thoroughly before service, taking account of the heat still retained from the previous day. In Salvatore’s trials and services, this preparation and the insulation allow successive pizzas to be baked with less intense firing to compensate for the cooling of the hearth. He describes an ability to maintain the pace that he had not experienced with the ovens he used before.
The hot dome also helps reheat exposed surfaces. This behaviour requires the pizzaiolo to adapt. During one trial, Salvatore measured about 600 °C on the hearth’s surface with his infrared thermometer. That single reading describes a heating test, not a normal baking temperature. The purpose of the insulation is to maintain a balance between the underside and the top of the pizza, including during busy periods.
The next day: using the oven’s heat for bread too
The heat stored the previous day is also used to bake the house-made bread for our bruschette, the following day before service, at around 200 °C for about 40 minutes. We place a small copper peel containing water in the oven to influence humidity during this bake. Managing that humidity helps us achieve the crust we want for our bread. Its dough and fermentation are different from those of our pizza dough.
The oven’s heat and our fermentation areas
Technical references
Falciano, Masi and Moresi, 2023: heat transfer and local cooling of the hearth
Falciano and colleagues, 2024: conduction, convection and radiation during pizza baking
Related archive articles
Autolyse: preparing pizza dough →